Click the image above to zoom in.
Tire Power Tire Softener
Tire Power Tire Softener
**THIS PRODUCT CAN ONLY BE SHIPPED VIA UPS GROUND**
Buy Now
Tire Power is designed to produce outstanding traction in all forms of high-performance driving, from street to full race and using road or racing tyre compounds.
Tire Power, available in a new “improved” formula, gives all the benefits of soft, sticky tyre compounds without the expense. This non-toxic, non-flammable liquid is simply painted on to the surface of the tyre, whether treaded or slick, and left to cure for 3-4 days to ensure adequate penetration and softening.
Durometer testing (used to measure tyre softness) reveals that one application of Tire Power can increase the softness of a tyre by up to 20 points. By comparison, a traditional drag racing burnout will achieve a tyre softening effect of around 5 points.
Tire Power uses a long-lasting, proven formula that stays in the tyre for much longer periods (it does not evaporate) and so is ideal for circuit racing, karting and motorcycle racing - in fact virtually any road race environment. Tire Power works on all kinds of tyres, both old and new, and by reversing the aging process, can even extend tyre life.
Key benefits:
- -Reverses the aging process
- -Unique long lasting proven formula
- -Guaranteed reduced lap times
- -Stays consistent throughout race
- -Increases levels of grip on any tire
- -No shrink-wrapping necessary
Tire Power is a unique tire treatment that penetrates the surface and softens the rubber. Unlike any of its competitors, Tire Power’s non-flammable, non-toxic formula actually reverses the aging process and gives increased levels of grip on all types of race tires. Tire Power is easily applied with a brush or roller onto the surface of the tire and is then allowed to penetrate. Further coats complete the treatment process. The tires are then left for 4-5 days before use to ensure adequate penetration and softening. Shrink-wrapping the tire is unnecessary, as Tire Power simply does not evaporate. Get the edge on the opposition! Guaranteed to reduce lap times, Tire Power can even extend the life of your old race tires by bringing back that lost performance.
Application
Step 1: The basic tools for applying Tire Power to racing tires include a scraper (a household type will do fine), a pair of latex gloves, a paint brush or roller and an open container in which to pour Tire Power (such as a paint pan).
Step 2: It is important to clean up the tire surface with the scraper to remove any built-up rubber. This will allow Tire Power to penetrate more evenly throughout the tire surface and also helps to prepare the tire for the next race. Pour some Tire Power into the container and then brush on to the tire's tread surface - there is no benefit in applying it to the sidewall. The first coat will probably take 20-30 minutes to absorb, depending on room temperature. Further coats of Tire Power can then be applied as desired, leaving similar absorption time after each coat. Four or five additional coats will give a significant increase in adhesion (durometer reading about 10-15 points lower).
Step 3: The tires must now be left to cure. This will take several days. It is a slow but necessary process to ensure the tires are softened adequately and that Tire Power has penetrated down through the tire. Because it is non-evaporative, Tire Power will keep on penetrating and tires will stay softened for weeks.
REMEMBER: After the tires have been used, the softness can be maintained by again scraping off built-up rubber and repeating the softening process. Once more, allow several days for adequate penetration.
Unable to retrieve comparison products. Sorry for the inconvience.
To find other products that match your vehicle try using our vehicle filter at the top of the page.
There are currently no reviews for this product.